You are now viewing content in Tethys Engineering through the integrated PRIMRE search. Clicking on titles will take you to the content on the integrated database. Partial word matches are returned (e.g. "test" finds "testing"), but every entered term must be found. If you don't find any results, try reducing the number of words entered. Filters to the right can help narrow your search.
Showing Results for
- Wang et al.
Ocean current energy harvester is a promising infrastructure to achieve self-powered marine wireless sensing system. This study proposes and investigates an underwater flag-like Triboelectric Nanogenerator (UF-TENG) based on the flow-induced vibration. The UF-TENG consists of two conductive ink-coated polyethylene terephthalate membranes and one strip of poly tetra fluoroethylene membrane with…
- Xia et al.
An underwater profiler is one of the popular platforms for ocean observation. Due to energy limitations, conventional underwater vehicles have a short life span, which cannot meet the needs of long-term ocean exploration. Therefore, there is a growing interest in using ocean energy such as ocean thermal energy and wave energy for driving. This study aimed to investigate an energy-saving and…
- Wang et al.
As an important nanofluidic device, an artificial ion nanochannel could selectively transport ions inside its nanoconfinement space and the surface charge of the pore wall. Here, confinement effects were realized by tandem nanochannel units, which kept their cascade gaps less than 500 nm. Within these gaps, ionic conductance was governed by the surface charge density of the channel unit.…
- Allmark et al.
Tidal devices are likely to faced with shear flows and subjected to various wave climates. The paper presents an experimental study of the combined impacts of shear profile and irregular waves on the loading of a 1/20th scale device operating at peak power extraction. The experiments presented were conducted at various depths to facilitate analysis of the effects of the shear flow and wave…
- Davey et al.
The EU H2020 MaRINET2 project has a goal to improve the quality, robustness and accuracy of physical modelling and associated testing practices for the offshore renewable energy sector. To support this aim, a round robin scale physical modelling test programme was conducted to deploy a common wave energy converter at four wave basins operated by MaRINET2 partners. Test campaigns were conducted…
- Noble et al.
Marine renewable energy (MRE) is still an emerging technology. As such, there is still a lack of mature standards and guidance for the development and testing of these devices. The sector covers a wide range of disciplines, so there is a need for more comprehensive guidance to cover these. This paper builds on a study undertaken in the MaRINET2 project to summarise recommendations and guidance…
- Ballard et al.
Unique umbilical designs for wave energy converters (WECs), including the ability to handle significantly larger motions and loads over long deployments, are often required when conventional marine umbilical designs for offshore oil and gas and offshore wind may not meet the design and cost needs of wave energy technologies. This study details a fatigue analysis of a dynamic power umbilical…
- Atcheson et al.
This paper provides an overview of a study completed which aims to increase WEC system reliability by using numerical tools to quantify load uncertainties at an early stage of the wave energy converter (WEC) design process. A case study that applies the variation mode and effects analysis (VMEA) methodology to a load assessment exercise for a reference WEC is presented. A first step in the…
- Artal-Sevil et al.
This paper presents the analysis of a hydraulic transmission model used in various types of wave energy conversion systems. In this case, a multi-point absorber wave energy converter is used because its structure is simple and efficient. This design offers some advantages such as greater energy harvesting and stabilization of the output power. In this way, the union of the hydraulic system and…
- Han et al.
Obtaining energy from renewable resources is a powerful measure in eliminating the impact of greenhouse gas and environmental pollution. At present, only 20% of energy comes from renewable energy sources, such as wind, solar, ocean, biomass, and geothermal energy. Sea water is the most abundant natural resource, accounting for more than 97% of total water resources. From a practical standpoint…
- Bui et al.
Hydrogels can be utilized to extract energy from salinity gradients when river water mixes with seawater. Saline-sensitive hydrogels exhibit a reversible swelling/shrinking process when they are, alternately, exposed to fresh and saline water. We present a comparison of several poly(acrylic acid)-based hydrogels, including poly(acrylic acid) (PAA), poly(acrylic acid-co-vinylsulfonic acid) (PAA…
- Oh et al.
Irreversible faradic reactions in reverse electrodialysis (RED) are an emerging concern for scale-up, reducing the overall performance of RED and producing environmentally harmful chemical species. Capacitive RED (CRED) has the potential to generate electricity without the necessity of irreversible faradic reactions. However, there is a critical knowledge gap in the fundamental understanding…
- Rao et al.
Reverse osmosis (RO) is perhaps the most promising desalination technology, but it is facing growing economic challenges when coupled to an intermittent energy supply, such as renewable energy-based grids. A technology with similar components to reverse osmosis is pressure retarded osmosis (PRO), which produces energy from differences in salt concentration (blue energy). However, with the…
- Ahualli et al.
It is now indisputable that clean energy sources must fulfill the increase in the energy demand of all societies. For such a challenge, every small step towards utilizing any renewable source counts. One prominent example is that of blue energy or energy production based on salinity gradients, existing in all kinds of environments, both natural and industrial. Specifically, the present work is…
- Hulme et al.
In this study, stack design for high concentration gradient reverse electrodialysis operating in recycle is addressed. High concentration gradients introduce complex transport phenomena, which are exacerbated when recycling feeds; a strategy employed to improve system level energy efficiency. This unique challenge indicates that membrane properties and spacer thickness requirements may differ…
- Xiao et al.
In this study, a novel wave energy converter is proposed, which features a dual turbine wheel to provide an amplified rotational speed to the generator. The design novelty of the system is that the counter-rotational turbine wheels are connected to the generator stator and rotor respectively through a belt-drive transmission system for amplification of the rotational speed of the generator.…
- Collins et al.
In the last decade, there has been a growing trend towards flexible body wave energy converters (WECs) enabled by rubber-like elastomeric composite membrane structures that can simplify all aspects of WEC design. Currently, there are few literature studies detailing the implementations of membranes into WEC design. This paper aims to overcome this by reviewing the developments, material…
- Nam et al.
Despite significant advances in the field applications of reserve electrodialysis (RED) to produce salinity gradient power, net energy production remains an issue owing to limitations such as high energy requirement for high flow rates of feed solutions, and severe fouling and pressure build up when thin spacers are used. Therefore, to maximize the performance and efficiency of energy…
- Chen et al.
Ocean Thermal Energy Conversion (OTEC) is one of the emerging industries of ocean energy and an important link in carbon neutrality. Turbine is a key component of ocean thermal energy conversion, which has an important impact on the performance and energy conversion efficiency of the system. This paper fully considers the application characteristics of ocean thermal energy conversion and the…
- Rodriguez et al.
One immediate challenge for the commercial development of floating Marine Renewable Energy Converters is reducing the weight and associated costs of mooring lines in deep water (>75m). Synthetic fibre ropes offer already a solution to the weight problems of using steel lines in deep-water offshore oil and gas installations as they have a very low weight in water. The present study…
Displaying 1 - 20 of 8331